Nidec NVS-07 Bedienungsanleitung Seite 6

Power cord and plug
Periodically remove dust on the power cord.
Accumulated dust could result in insulation failure due to
moisture, which could result in fire.
Ground the unit.
Be sure to ground the unit to avoid electric shock.
Do not touch switches and plugs with wet hands.
Operating switches, plugging and unplugging the power cord
with wet hands could result in electric shock. If there is any
clay on them, remove it.
Foreign materials
Do not put metals and/or other flammable
materials inside the unit.
Doing so could result in electric shock and/or fire.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Installation
This unit is heavy. Pay attention when handling.
Do not attempt to unpack this unit by yourself. Have three or
more people help unpack and/or move this unit. Excess strain
could cause injury. This unit is heavy, dropping it could result
in injury.
Operation
Pay attention to loose fitting clothing,
accessories, and/or long hair.
Before operating this unit, be sure to remove or secure
dangling items such as loose clothing, jewelry, scarves, etc.
Long hair should be tied in back as well. Failure to do so may
result in getting caught in moving parts during operation.
Be careful when handling the hopper cover.
Be careful not to get fingers, hands and/or arms caught in the
hopper cover.
Securely hold the handle, and slowly open/close the cover. Do
not remove your hand from the handle while opening/closing.
When the unit is not being used, open up the
vacuum pressure relief valve.
When the unit is not in use or when the vacuum is not needed
during the mixing process, be sure to open the pressure relief
valve. If any gases are generated during the processes of
mixing and pugging, pressure can build up inside the hopper.
Children shall not play with the appliance.
5
Warning
！
Operation
Do not modify the unit. Do not use it for purposes
other than pottery making.
Do not use a modified unit. Do not use the unit for other
purposes than mixing or pugging pottery clay. Failure to
follow this could result in malfunction and/or accident.
User limitation.
In facilities where multiple people use this unit, designate a
person to supervise the pugmill's use. Never allow anyone
who is unfamiliar with this unit to operate it. Everyone who
has access to use the pug mill should have a complete
understaning of the instruction manual.
Do not put hands into the clay extruding slot.
Never put fingers or hands into the nozzle end of the pugmill.
Failure to do so could cause fingers and hands to get caught,
and result in injury.
Caution
！
Power cord and plug
Do not obstruct access to the power cord or plug.
Failure to follow this could prevent you from easily
unplugging the power cord or plug in an emergency.
When the unit is not being used, turn the power OFF.
When the unit is not being used for an extended period of
time, or there is a possibility of lighting, turn OFF the power
as well as unplugging the unit from the outlet.
Maintenance
Turn the power OFF and unplug the unit before
inspection or other relevant circumstances.
Before cleaning, inspecting, adjusting or other replacement
procedures, turn OFF the power as well as unplug the unit
from the outlet.
Never pour water direct on the unit to clean.
Never pour water directly on the pugmill to clean it. Doing so
could result in electric leakage and/or malfunction. To clean,
wipe off the unit with a damp sponge, towel, etc.
* Only the auger screw and nozzle can be cleaned directly
with water after being fully disassembled.
Cleaning and user maintenance shall not be made
by children without supervision.
English