Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before installing, operating or servicing this unit, please read the instruction manual carefully
and follow it for proper use. Start using only after you have read about the equipment's
functions, safety information and precautions.
This instruction manual provides two grades of safety warnings: "Warning" and "Caution".
Each of them is an important description related to safety. Be sure to follow them.
Warning
Caution
We categorize the type of those precautions using the following symbols throughout the manual.
Malfunctions
In the event of any malfunction, stop using
the unit immediately.
When a malfunction occurs, unplug the power cord.
Failure to follow this could result in fire and/or injury
due to electric shock and/or leakage.
• Smoke and/or abnormal smell/sound is detected.
• The unit has become deformed and/or parts are
damaged.
• The auger screw continues to run even when the
hopper cover is opened.
Installation
Install the unit on a level surface.
Installing the unit on an uneven or sloped surface
could cause the unit to fall, which may result in injury.
Avoid installing the unit in places exposed to
rain, standing water and/or high humidity.
Insulation failure could result in fire and/or injury due
to electric shock and/or leakage.
Safety Precautions
This indicates the possibility of severe injury or even death, and fire if a user
disregards the instruction and operates the unit improperly.
This indicates the possibility of injury or damage if a user operates the unit
improperly. However, depending on the circumstances, there is still the possibility
that severe injury may result.
A prohibited action you must not do.
A reminder to pay close attention.
An action you must always do.
Warning
Power Cord and Plug
Do not use the unit if the power cord or plug
is damaged.
If the power cord or plug is damaged, or does not fit
securely in the outlet, do not use the unit. Failure to
follow this could result in fire due to electric shock and/
or short circuit.
* If the power cord is damaged, please contact your
dealer or our office.
Do not overload the electric circuit.
If you share the outlet with other electric units, an
overload could result in fire.
Do not use the unit a voltage other than AC
230V.
Doing so could result in electric shock and/or fire.
Do not take any actions that could result in
damage to the power cord.
Do not pull, break, fabricate, and/or forcibly bend the
power cord. Do not move it close to any heating source,
or place heavy materials on it. Failure to follow this
could result in electric shock and/or fire.
English
Be sure to observe
4
Werbung
