Video Output - Jsa Nightlux R-425 Bedienungsanleitung

Charging
Charge the device for at least 4 hours with the included USB charger before first
Do not use a quick charger.
use
The charging socket is located under the plastic cover on the side of the device.
A USB Type C charging cable is required.
Charging specifications:
The charging indicator lights up red during charging
The charge indicator will turn green when charging is complete.
Note: If you connect the switched on device to an external power source, it will be
supplied with power, but the integrated rechargeable
A plug icon is displayed on the screen.
External power source:
power source (socket power supply or 5V power bank) and then switch it on, the
device will be supplied with power and the integrated battery will be charged. A
battery symbol is displayed
PC: When connected to a computer, the switched on device is supplied with power
and data transfer is possible.
Note: Charging the battery via computer is only possible, if the device is switched
off.

Video output

You will find the video output under the plastic cover on the side of the device. The
video output is always active. You can transfer the picture of the thermal imager to
an external TV screen by using a HDMI cable
Note: The image can be displayed either on the device screen or on the external
TV screen. Not on both screens at the same time. When you remove the HDMI
cable, the image will be displayed on the device screen again.
5V, 2A
If you connect the switched off device to an external
battery will NOT be charged