JSA nightlux R-425 Bedienungsanleitung Seite 18

Switch on/off
Switch on: Press and hold the power button 3 seconds.
The work indicatort lights up green when the camera is started
Switch off: Press and hold the power button until the shutdown sequence is
completed. If the shutdown sequence is interrupted, the device goes into standby
mode. If the work indicator is activated, it remains green to indicate that the device
has not been switched off completely.
Shortcut menu
Press the button M in order
Short press the up/down button in order to choose between PIP, screen brightness,
stadiametric rangefinder, hot track or super energy-saving.
Select the position of the PIP window. The window displays the centre of the main
picture in 2 x magnification.
L Screen brightness
You can choose between 10 brightness levels from 10 % to 100 %
L Stadiametric
The stadiametric rangefinder can estimate the distance of a target using a known
distance. Three target examples are available on the device as a reference:
hare (35 cm), boar (90 cm), deer (150 cm), as well as the real-time display of the
distance information of the three species.
Operating procedure:
target image, press the up/down button to change the distance between the upper
and lower horizontal line until the upper horizontal line is aligned with the top of the
target image.
By comparing the size of the target animal to the size of the target example, the
device automatically
L Hot Track
When the hot track function is active, the hottest point in the picture will be indicated
by a cross, this cross follows the hottest point through the picture.
L Super energy-saving
When the super energy-saving
reduced to 30% and WiFi is turned off. When the super energy-saving
turned off the settings for screen brightness and WiFi drop back to their former
values.
to enter the
rangefinder
Line up the bottom horizontal line with the bottom of the
calculates and displays the approximate
function is activated, the screen brightness is
shortcut menu:
distance of the target.
function is