JSA nightlux R-425 Bedienungsanleitung Seite 14

Do not point the thermal imager towards strong sources of energy (sun,
laser emitting devices or their reflections).
infrared detector
If the device is not used for a longer period of time, charge the device every
2 months for 4 hours.
Caution, do only use the original Charger or one with the same
specifications: 5V, 2A
Using Quick Chargern
because quick chargers
Store in a dry, well ventilated environment.
Do not charge the device at a surrounding
Clicking noises and short freezing of the picture during the calibration
process (adaption of the device to the surrounding
technical reasons
Shipment
Thermal imager JSA 'R-425, 'R-435, IR-450, 'R-435 enhanced,
Pitch 12 HD, 'R-635
Power adapter with charging
(do only use the original charger or a charger with 5V, 2A)
HDMI cable
Operating manual
Warranty card
Nightlux cleaning
Caution!
could be the result.
can cause battery
work with too high voltages.
and no malfunction.
or IR-650
cloth
Damage or destruction
damage
temperature
temperature)
cable USB Type C
of the
or other damages
above 40 oc
are due to