JSA nightlux R-425 Bedienungsanleitung Seite 20

WiFi
The device can be connected to the mobile phone via WiFi and remotely controlled
by the mobile app.
When the WiFi function
phone, the WiFi icon flashes and the WiFi name is displayed
screen.
If a device is connected to the phone via WiFi, the WiFi icon is displayed on the
screen
Mobile phone APP: Warning:
Download the 'TracklR' app, open the app, find 'Handheld T I-XXXX' on your
phone's Wi-Fi connections
After a successful connection
with your mobile phone.
Android: You can find the app in the Google Play Store
IOS: You can find the app in the APP Store
Power saving
Standby settings:
Auto standby: You can choose between the following settings:
Nona, 5, 10 or 15 minutes
If no button is pressed, the device changes automatically
the set time. The working indicator changes into blinking mode. If the working
indicator is switched off during use, the working indicator stays off in the standby
mode.
Manual standby:
(screen black, calibration active) can be started.
Auto power off: You can choose between the following settings:
Nona, 15, 30 or 60 minutes.
If no button is pressed, the device automatically
Note: The functions auto standby and auto power off do not work during an existing
WiFi connection.
Indication settings
Charging indicator:
The charging indicator lights up red: charging is active.
The charging indicator lights up green: charging completed.
is activated,
and enter the password '12345678'
is established, you can control the thermal imager
settings
By interrupting the shutdown sequence the standby mode
but the device is not connected
No compatibility
switches off after the set time.
to the mobile
at the top of the
guarantee
into standby mode after