Citizen IF1-ES04 Schnellinstallationsanleitung Seite 2

 Safety Regulations
English [EN]
Print servers are active network components for printers in office
environments and are designed for the direct integration of printers into
networks.
Before starting the initial setup procedure and during the operation of the
print server, please note the following safety regulations. Their purpose is to
protect yourself and others from personal injuries, and avoid damage to the
equipment.
• This print server is a component for a printer from Citizen Systems Japan.
Also read and follow the safety instructions and precautions in the printer's
documentation.
• Read the documentation and make sure that your system meets the re-
quirements listed therein.
• The device must only be connected to the mains and to the network by
qualified personnel.
• Avoid contact with humidity or liquids.
• The device must only be connected and operated if it is in perfect condi-
tion.
• Make sure that no-one steps on or stumbles over the cables.
• Do not connect a telephone cable to the RJ-45 connector. The RJ-45 con-
nector may only be connected to SELV voltages. For the connection to the
RJ-45 connector only STP cabling (category 5 or better) may be used. The
shielding must fit flushly to the connector.
• The device must not be directly connected to outdoor lines.
• Before unpacking the device, take all necessary precautions to avoid dam-
age caused by electrostatic discharges.
• The device must not be used externally of the printer.
• Electrostatic discharges (ESD) may impair device performance.
2 Quick Installation Guide