Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changing the Zeroconf IP address
Make sure that:
The Smart Product Manager is installed and running;
The print server whose IP address is to be changed is displayed in the
device list.
The print server has an IP address from the Zeroconf reserved address
range (169.254.0.0/16).
Proceed as follows:
1. Select the print server in the device list.
2. Click the device menu via the Device menu item or open the context menu by
right-clicking on the print server.
The corresponding menu appears.
3. Select Set IP address in the menu.
The Set IP address dialog appears.
4. Change the IP address.
5. Confirm the entry with OK.
The IP address is changed.
14
[en]
12.
Quick Installation Guide
Werbung
