Citizen IF1-ES04 Schnellinstallationsanleitung Seite 11

Installing the Print Server in the Printer
1. Remove the screws from the interface.
2. Remove the metal cover.
3. Insert the IF1-ES04 into slot.
4. Fasten the IF1-ES04 board screws.
Connecting the Print Server to the Network
1. Connect the network cable (RJ-45) to the IF1-ES04.
Turn the Printer On
1. Connect the power cord to the printer.
2. Turn the printer on.
In order to verify the installation you can print a status page. To do this, press
the print server's button for a short time.
Quick Installation Guide
Proceed as follows:
Proceed as follows:
Proceed as follows:
(Establish the power supply)
[en] 11