Herunterladen Diese Seite drucken

audiowerkstatt trigger2midi2trigger v2 Bedienungsanleitung Seite 7

Werbung

e) Gate to trigger converter:
If you hold one of the buttons while powering up, a special mode is started. The converter is now deactivated and the blinking if
the led is slower.
If you set the pulse.length to the smallest setting, you can use it as gate-to-trigger-converter. With trigger.type in and
„midi-ou
"-Buchse
trigger.type out , the trigger-types can be set. The ring of the clock -jack is input and the tip is output. Normal insert-cables
can be used to connect the analog input/output.
If you do not hold one of the buttons while powering up next time, the normal converter-mode is started again.
f) Trigger to gate converter with adjustable gate-length:
If you hold one of the buttons while powering up, a special mode is started. The converter is now deactivated and the blinking if
the led is slower.
Now you can use it as trigger-to-gate-converter. With trigger.type in and trigger.type out , the trigger-types can be set and
„midi-ou
"-Buchse
with gate.length , the length of the clock-pulse can be adjusted. The ring of the clock -jack is input and the tip is output.
Normal insert-cables can be used to connect the analog input/output.
If you do not hold one of the buttons while powering up next time, the normal converter-mode is started again.
Specifications:
Connectors:
Control elements:
Display elements:
Power:
Dimensions:
Weight:
Scope of delivery:
- audiowerkstatt trigger2midi2trigger v2
- manual (german/english)
Contact:
audiowerkstatt UG (haftungsbeschränkt)
Weserstr. 78
12059 Berlin
Germany
info@audiowerkstatt.de
http://www.audiowerkstatt.de
WEEE-Reg.-Nr. DE 49518480
midi-in (5-pol DIN)
midi-out (5-pol DIN)
clock (stereo-phone-jack 6,3mm)
start/stop (stereo-phone-jack 6,3mm)
power (plug 5,5mm, Pin 2,1mm)
„midi-ou
"-Buchse
select -button
„midi-ou "-Buchse
„midi-ou
"-Buchse
- or stop -button
„midi-ou "-Buchse
„midi-ou
"-Buchse
+ or start -button
„midi-ou
"-Buchse
2x Status-LED input
„midi-ou
2x Status-LED trigger.type in
„midi-ou
2x Status-LED trigger.type out
„midi-ou
4x Status-LED clock.divider in
„midi-ou
4x Status-LED clock.divider out
„midi-ou
6x Status-LED pulse.length
9-12V AC or DC (Polarity doesn t matter)
112 mm x 72 mm x 48 mm
290 g
„midi-ou
"-Buchse
„midi-ou
"-Buchse
„midi-ou
"-Buchse
"-Buchse
"-Buchse
"-Buchse
"-Buchse
´t matte
„midi-ou
"-Buchse
„midi-ou
"-Buchse
"-Buchse

Werbung

loading

Diese Anleitung auch für:

Trigger2midi2trigger