Siemens RK 667 Bedienungsanleitung Seite 29

Manual Tuning | |
To select a station you do not know the frequency of, use the manual tuning (/\) (V)
buttons or the ROTARY TUNING control on the side of the radio.
manual tuning
ia
auto scan «
1. Press the power button to turn on radio.
2. Select a band.
3. Press repeatedly the (A) or (V) buttons to reach a desired frequency. Press and hold
the (A) or (V) buttons for at least a half second or more to change frequencies
rapidly.
Rotate the TUNING knob until the desired frequncy or station is tuned in using the
SIGNAL STRENGTH INDICATOR in the display for the best reception.
manual tuning
ape woh
31m 25m Caan scan
19m 16m em
Coy) Cx) = =
im direct access
Cu)
45 memories
fm/ Iw/mw/13sw synthesized receiver
Note:
When you repeatedly press the (A) or ( V ) buttons, the frequencies change in increments
of:
FM: 50 kHz
LW: 9 kHz
MW: 9 kHz or 10 kHz
SW: 5 kHz
25