Siemens RK 667 Bedienungsanleitung Seite 25

Preliminary Settings _
Setting the Clock |
The time is displayed in the 24 hour mode since most shortwave stations operate according
' to Greenwich Mean Time. This is the standard that is used throughout the world.
The clock will start when 4 AA batteries are installed. The display shows 0:00.
CS sleep
cs
time
set
is
oa
1. Press time set. ,,0:00" disappears & for 12 seconds time set flashes.
2. While FLASHING set the correct time by pressing the numbered buttons. As you press
the corresponding button the number shows up on the LCD display.
120m 30m FBG
C2)
60m 49m 41m
Ca) C5) C6)
31m 25m 2im
C9)
19m 16m 13m
m
3. Ifyou press the wrong number, press the C (CORRECT) button which deletes one -
number at a time. Repeat step 2 again.
120m 90m 75m
m m m
C4) C6)
3im 25m 21m
C9)
19m 16m 13m
Note:
Time can only be adjusted when time set is in flashing mode.
4. Now press button marked enter. Display shows minutes and seconds.
2\