Werbung
Verfügbare Sprachen
Verfügbare Sprachen
—
Direct Tuning
—
Manual Tuning
—
Scan Tuning
—
Memory Tuning
Example:
To tune 100.70 MHz on 'the FM band, follow this procedure:
1.
Press the power button to turn on the radio.
2.
Press the button marked, freq (Frequency).
3.
Press the corresponding buttons, marked (1), (0), (0). (), (7), (0). That exact frequency
will now show up in the display.
:
4.
Press the button marked enter within twelve seconds. The frequency and band will
now show up in the display. The SIGNAL STRENGTH will also show.
Note:
Be sure to press the decimal point (-) in 100.70 MHz, otherwise the display will show
sw, (10070 kHz) automatically.
5.
Extend the antenna all the way and rotate for best FM reception.
6.
Adjust the VOLUME and TONE controls for the desired sound.
7.
When selecting a stereo FM station, make sure that the FM mode switch | is in the
STEREO position.
AM SENS
10
°DX
* LOCAL
AM
sal
FM——
5
(S| *NARR | STEREO
|
eWIDE
| MONO
7
DC IN 6V
OO
Af
Oe
Cama)
=
a
Cia)
access
Cometer)
.
£5 memories
fm/iw/mw/13sw s$}
ed receiver
AWS.
24
Werbung
