Cleaning And Care - Peaq PDP130 Bedienungsanleitung

ENGLISH
DE-/ACTIVATE REMOTE ACCESS
Remote
Access
1. Press / OK.
2. Scroll with  and  to 'Answer
machine' and press
3. Scroll with  and  to 'Remote Access'
and press
4. Select 'Enable' or 'Disable' and press
/ OK to confirm.
5. If you select 'Enable' then you have to
enter the old PIN (default 0000) and a
new PIN. Press
OpERATE REMOTE ACCESS
1. Make a call to your home number with a
touch tone phone.
2. Enter * when you hear the announcement.
3. Enter your PIN code.
• You now have access to your
answering machine, and you can
now listen to the new messages.
4. Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Key Function
1 Activate remote access
2 Play/Stop message
4 Repeat actual message or playback
previous message
5 Delete actual message
6 Skip to next message
44
PDP130_IM_08.indb 44
/ OK to confirm.
/ OK to confirm.
/ OK to confirm.
7 Activate the answering machine (not
available during playback message)
9 Deactivate the answering machine
(not available during message
playback)
* Enter PIN

Cleaning and care

• Unplug the adaptor from the socket
before cleaning the unit.
• Attention! Do not let water penetrate
into the unit.
• Clean the housing with a lightly
dampened cloth.
• Do not use sharp, scouring or aggressive
cleaners.
• Do not use chemicals (such as gasoline
or alcohol) to clean the housing.
11/9/12 11:17 AM