Peaq PDP130 Bedienungsanleitung Seite 43

5. Select 'Answer & Record' or 'Answer
Only' and press
6. Start recording close to the microphone
after the beep. Press
the record.
Incoming message
Each message can be up to 2 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
LISTEN TO INCOMING MESSAGES
You can listen to the incoming messages in
the sequence they are recorded.
bASE STATION
• To start/stop listening, press
• To adjust the volume, press 'Vol+ /-'
• To play the previous message/replay the
current message, press .
• To play the next message, press .
• To delete the current message, press
'Delete'.
HANDSET
Play
Message
1. Press / OK.
2. Scroll with  and  to 'Answer
machine' and press
3. Scroll with  and  to 'play Message'
and confirm with
PDP130_IM_08.indb 43
DELETE OLD MESSAGE
/ OK to confirm.
/ OK to end
1. Press
2. Scroll with  and  to 'Answer
3. Scroll with  and  to 'Delete old
Screening
When the answering machine is on and takes
a call, you can listen to the caller leaving a
message. You can then identify the caller and
.
decide whether to take the call in person.
1. During an incoming call wait for the
2. Press
3. Press
4. Press
5. During the call screening you can adjust
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as
/ OK to confirm.
your system PIN. The preset PIN is 0000.
/ OK.
Del Old
Messages
/ OK.
machine' and press / OK to confirm.
Message' and confirm with
answering machine to pick up the call.
/ OK, to hear the caller leaving
message.
, if you want to talk to the caller.
to stop listening the caller
OFF
leaving message.
the volume with  and .
ENGLISH
/ OK.
43
11/9/12 11:17 AM