SoundLogic EARBUDS PRO TWS Bedienungsanleitung Seite 3

EN
Thank you for purchasing our Earbuds Pro. This manual
will provide instructions for effective and safe use of the
product. Please read it carefully before use and store the
manual in a safe place for future reference. If you ever pass
the product on to others, this manual should be included.
1. Safety instructions
• For intended use only, as described in this manual.
• Before use, inspect the device and its parts. Do not use in
case of damage.
• To avoid hearing damage, limit the time you use this
sound source at high volume and set the volume to a safe
level. Prolonged exposure to high volumes can cause
hearing damage.
• Do not place near heat sources such as radiators, cookers,
etc.
• Keep away from sources of ignition.
• Do not operate where aerosol (spray) products are being
used.
• Do not place, store or use the product near water.
• Do not let moisture come into contact with any electrical
parts.
• Do not use the product in extreme hot, cold or humid
environments.
• Do not attempt to repair, disassemble or alter the product
yourself.
• Handle with care.
2. Package content
- Earbuds
- Charging case
- USB-C charging cable
- Manual
3. Description of parts
1. Multifunction (MF) touch panel
2. LED light indicator
3. Charging port
4. Speaker
4
1
2
3
4. Operation
4.1 Charging
Note: Charge the earbuds before first use. This takes about
1.5 hours.
Earbuds
- Place the earbuds in the charging case.
- The LED indicator lights up red during
charging and turns off when the earbuds
are fully charged.
Charging - Connect it to a power source with the
case
provided USB-C charging cable, or to the
mains via a suitable 5V/1A adapter (not
included).
- The LED light indicator flashes red during
charging and stays on when fully charged.
Note: Keep the earbuds in the charging case
and charge them at the same time.
4.2 Pairing
1. Take the earbuds out of the charging case and they will
automatically turn on and pair with each other.
2. The LED light indicator flashes red and blue alternately
when they are successfully paired.
3. Hold the earbuds within range of the smart device you
want to pair them with (<10m).
4. Turn on Bluetooth on your device and select 'TWS
Earbuds' to make a connection.
5. Pairing was successful when you hear the voice prompt
'Connected' and the LED light indicator is no longer lit.
Note: The earbuds reconnect to your device automatically
after initial pairing.
4.3 Controls
On / Off Touch and hold the MF panel.
Pause / Play Touch the MF panel once.
Answer / End Touch the MF panel once.
phone call
Volume up Touch and hold the MF panel on
the LEFT earbud.
Volume down Touch and hold the MF panel on
the RIGHT earbud.
Next track Touch the MF panel on the RIGHT
earbud 3 times.
Previous track Touch the MF panel on the LEFT
earbud 3 times.
Voice assistant Touch the MF panel 2 times to
activate your smart device's
voice assistant.
5. Maintenance
- If necessary, clean the outside of the earbuds with a
slightly damp cloth. Dry thoroughly with a clean and soft
cloth.
- Charge regularly to prolong battery life.
6. Technical specifications
Material ABS
Input DC 5V / 1A
Battery Earbuds: 401214 li-ion battery 3.7V
35mAh 0.1295Wh
Charging case: 602020 li-ion battery
3.7V 200mAh 0.74Wh
Charging time 1.5 hours
Operation time 3.5 hours
Bluetooth version 5.3
Bluetooth range 10 m
Frequency 2.4-2.4835 GHz
band(s)
Maximum ±4 dbm
radiated power
Frequency range 100Hz - 20 kHz
Impedance 32 Ω
Number of 300 times
charging cycles
Size 6 x 4.5 x 2 cm
7. Removal of rechargeable battery
The rechargeable Li-ion battery inside this device is not
removable.
8. Disposal
Dispose of the article and the packaging materials in
accordance with current local regulations.
The crossed out wheelie bin symbol means that this
product shall not be disposed of with normal
household waste. Electronic and Electrical Equipment
not included in the selective sorting process are potentially
dangerous for the environment and human health due to
the presence of hazardous substances. Please dispose of
responsibly at an approved waste or recycling facility.
The CE marking is a certification mark that indicates
conformity with health, safety and environmental
protection standards for products sold within the European
Union. The CE marking is the manufacturer's declaration
that the product meets the requirements of the applicable
EC directives.
Recycling helps to reduce the consumption of
resources and reduce the environmental impact. If
you wish to discard the packaging, comply to the
environmental legislation in your country.
9. Simplified Declaration of Conformity
Hereby, Remalux B.V. declares that Item number: 80254,
Earbuds Pro, is in compliance with the RED Directive
2014/53/EU. The full text of the EU DoC is available at the
following internet address:
https://soundlogic.eu/declaration-of-conformity/
3