Hama HA-2710 Bedienungsanleitung Seite 9

User manual
Table of Contents
1. General Information
2. Safety Instructions
3. Features
4. Inserting Batteries/Empty Batteries
5. Controls
6. Connecting the Headset Switch
7. The Telephone Receiver Switch - Headset
8. The Adjustment Switch
9. The "ON/Auto" Switch
10. The MUTE Button
11. Connecting a Power Pack
12. General Notes
13. Troubleshooting
14. Notes/Settings
1. General Information
The headset switch HA-2710 enables you to connect a headset to all common corded telephones.
The HA-2710 has several adjustment switches for adjusting the headset switch to the telephone and
the headset switch to the headset. No adjustments are required between the headset switch and
the headset when using the headset provided (two 3.5mm universal jack plugs). Only the sound level
is adjusted.
Please remove empty batteries immediately!
Make sure to read about all the headset switch functions before connecting it.
Install the DECT cordless telephone at least 1 meter away to avoid electrical noise.
2. Safety Instructions
The headset switch is only intended for use in dry rooms. Only use it as described in this manual.
The headset switch HA-2710 may only be used with approved telephones! (Germany: BZT, R&TTE,
FTZ, CE, LVD Low-Voltage Directive)
Only use power packs approved by Hama!
Do not open and/or make changes to the headset switch. The headset switch does not contain any
parts that need servicing.
Remove the cable to change the battery! Never use without the battery compartment cover!
Do not use the headset switch if the cable or casing is damaged or if liquid enters the headset.
Contact Hama service for all other errors.
Please remove empty batteries immediately!