ASROCK 775i945GZ Bedienungsanleitung Seite 15

Verfügbare Sprachen

2.5 Surround Display Feature

Thanks to ASRock patented AGI Express Technology, this motherboard supports

Surround Display upgrade. With the internal onboard VGA and the external add-on

PCI Express VGA card, you can easily enjoy the benefits of Surround Display

feature. Please make sure to set the BIOS onboard VGA selection into "Enabled",

and start your computer with onboard VGA if you want this motherboard to

support multi-monitors. For the detailed instruction, please refer to the document at

the following path in the Support CD: ..\ Surround Display Information

2.6 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is "Short". If no jumper cap

is placed on pins, the jumper is "Open". The

illustration shows a 3-pin jumper whose pin1

and pin2 are "Short" when jumper cap is

placed on these 2 pins.

Jumper

PS2_USB_PWR1

(see p.2 No. 1)

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS

(CLRCMOS1, 2-pin jumper)

(see p.2 No. 10)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power

supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on

CLRCMOS1 for 5 seconds.

ASRock 775i945GZ Motherboard

Short

Setting

Short pin2, pin3 to enable

+5VSB (standby) for PS/2

or USB wake up events.

2-pin jumper

Open

Description

1 5