Whispbar K976W Montageanleitung Seite 10

EN
Fitting Kit
K976W
Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
Tighten locking screw on both legs evenly,
3 Nm (2.2 ft lb).
Fitment Rear Bar Only
Use hex key to tighten locking capscrew.
Do not over tighten.
Please take care when closing the doors as
contact can be made with the clamp if it is
not installed correctly. Close the door
slowly upon first inspection.
10