ESX Signum Serie Bedienungsanleitung Seite 8

Please read the user's manual carefully before the installation and the first operation
of the amplifier.
SPECIFICATIONS
Output Power RMS
Output Power Max.
Loudspeaker impedance (stereo)
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Highpass Filter (CH1/2)
Highpass Filter / Bandpass Filter (CH3/4)
Lowpass Filter / Bandpass Filter (CH3/4)
Bass Boost (CH3/4)
Low Level Inputs
High Level Inputs
Auto Turn On
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
All Specifications are subject to change
8
SXE250.4
4 x 150 W @ 4 Ohms
4 x 250 W @ 2 Ohms
4 x 300 W @ 4 Ohms
4 x 500 W @ 2 Ohms
2 – 8 Ohms
5 – 40 000 Hz (-3 dB)
< 0,5 % (1 kHz)
> 90 dB
0,1 – 7 V
10 kOhm
10 – 250 Hz @ 12 dB/Octave
10 – 250 Hz @ 12 dB/Octave
50 – 250 Hz @ 12 dB/Octave
0 - 12 dB
4 x RCA (CH 1-4)
Via enclosed Cable Jack (CH 1-4)
Only via High Level Inputs
+12 V (9 – 15 V), negative ground
120 A (external)
220 x 53 x 460 mm