Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
• When connecting the power cord to the product's AC input terminal, make sure the connector is fully and firmly inserted.
nRear view
PN-LA652
Power cord
(Supplied)
For
power outlet
For power
outlet
1. AC input terminal
2. RS-232C input terminal
3. Audio output terminal
4. LAN terminal
5. DisplayPort output terminal
6. HDMI2 input terminal (support ARC)
7. DisplayPort input terminal
*1 This port is for "CLONE SETING" and future software upgrades.
Imports or exports the monitor settings via the USB flash device when selecting "CLONE SETTING". (See OPERATION
MANUAL.)
*2 Factory setting. You can set the terminal that connects the computer and touch panel in each input mode with "TOUCH
INPUT SELECT".
TIPS
• The Information Display Downloader can also be downloaded from the following website.
https://business.sharpusa.com/product-downloads (US)
https://www.sharp.eu/download-centre (Europe/Asia/Pacific)
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs and latest firmware.
To install the software, see the manual for each.
Pen Software setup program and Touch Viewing Software/Touch Viewer setup program, latest firmware can be downloaded
using Information Display Downloader.
Connections
1
1
*
2
1
Power cord
(Supplied)
8. USB2 port (USB3.0 compliant, Type-A)
9. TOUCH PANEL terminal*
10. Option board slot
11. USB Type C port*
12. HDMI1 input terminal
13. USB1 port (USB3.0 compliant, Type-A)
3
4
5
6
7
8
9
2
(for HDMI1/HDMI2/DisplayPort)
2
10
11
12
13
7
E
Werbung
