Sharp PN-LA862 Installationsanleitung Seite 13

nInstalling the option board
You can install the option board that is compatible with Intel
Smart Display Module Small (Intel SDM-S) and Intel Smart
Display Module Large (Intel SDM-L) specifications.
Caution
• If there are cables already connected, disconnect them all.
TIPS
• Contact your dealer for compatible optional boards.
1. Spread a thick, soft cloth (blanket, etc.) that will prevent
damage to the LCD panel on a stable flat surface where
the entire monitor can be placed, and place the monitor
with the LCD panel face down on the cloth.
Soft cloth
2. Remove the screws (x2), and then remove the slot
cover.
Intel SDM-S:
Intel SDM-L:
For Intel SDM-L, remove the center rail before attaching
the option board.
3. Attach the option board with the screws removed in
step 2. (Recommended fasten force: 50~80 N•cm)
Intel SDM-S:
Intel SDM-L:
Slot cover
nRemoving the option board
Slot cover
Assemble in the opposite order of the installation.
Caution
• Make sure the option board is inserted into the slot in the
correct orientation.
• Do not apply excessive force to manipulate the option
board before attaching it with screws.
• Ensure the option board is securely fastened using the
original screws to prevent the option board from falling
out the product. A falling option board may expose you to
danger.
Center rail
Intel SDM-S
Intel SDM-L
11
E