Herunterladen Diese Seite drucken

Gessi VIA MANZONI 38632 Bedienungsanleitung Seite 23

Werbung

MANUTENZIONE - MAINTENANCE - ENTRETIEN - WARTUNG -
MANUTENCIÓN - ОБСЛУЖИВАНИЕ - ΣΥΝΤΗΡΗΣΗ - 保养
Fig. 25
Fig. 26
2.5 mm
A
X
F
B
E
D
Ch. 28 mm
C
SOSTITUZIONE DELLA CARTUCCIA
Prima di sostituire la cartuccia, accertarsi che il raccordo dell'acqua sia chiuso.
Togliere il tappino in finitura facendo attenzione a non danneggiarlo e svitare il grano (A) utilizzando
una chiave a brugola, estrarre quindi la maniglia (B) sfilandola dalla cartuccia (F). Sollevare la ghiera
copricartuccia (C) facendo leva tramite l'apposita scanalatura di riferimento. Allontanare l'anello indicatore
(D), svitare la ghiera di fissaggio (E) e togliere la cartuccia (F) dal corpo del miscelatore.
Infine introdurre la nuova cartuccia, accertandosi che le due spine di centraggio siano nella loro sede (X)
e che le guarnizioni siano correttamente posizionate.
CARTRIDGE REPLACEMENT
Before carrying out this operation make sure that water supply is turned off.
Remove the finish plug paying attention not to damage it and unscrew the screw (A) using an Allen key,
remove the handle (B) from the cartridge (F). Lift the finishing ring nut (C) using the reference notch.
Remove the indicator ring (D), unscrew the fixing ring nut (E) and take the cartridge (F) out from the mixer
body.
Put the new cartridge into the body checking that the two centering pins enters into the respective seats
(X) and that gaskets are well positioned.
SUBSTITUTION DE LA CARTOUCHE
Avant d'effectuer la substitution de la cartouche, vérifier que la connexion de l'eau est fermée.
Enlever le bouchon en finition faisant attention à ne pas l'abîmer et dévisser les grains de fixage (A)
utilisant une clé à griffe, extraire en suite la poignée (B) en la soulevant de la cartouche (F). Soulever la
virole de finition (C) en utilisant la rainure de référence. Quitter la bague d'indication (D), dévisser la virole
de fixation (E) et enlever la cartouche (F) du corps de mitigeur.
Introduire enfin la cartouche nouvelle, en vérifiant que les deux pivots de centrage entrent dans les sièges
respectifs (X) et que les garnitures sont bien positionnées.
23

Werbung

loading