Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. PARTS AND COMPONENTS
Fig. 1
1. Steam outlet
2. Indicator light
3. Steam push button
4. Handle
5. Water tank
6. Power cable
7. Brush head
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This device is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
Garment steamer
-
Brush head
-
Instruction manual
-
3. OPERATION
Turn the water tank clockwise and remove it. Open the silicone plug and fill the tank to the
-
maximum capacity (Fig. 2).
Hold the device with one hand and attach the bristle brush to the iron head with the other
-
hand (Fig. 3).
After filling the tank, put it back into the iron and connect it to the power supply: the
-
indicator light will illuminate white (preheating).
ENGLISH
IRONHERO 1800 FORCE
35
Werbung
