Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention to
the safety instructions. If you have any questions or comments about the device, please
contact the customer line.
✉
www.alza.co.uk/kontakt
✆
+44 (0)203 514 4411
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Importer
Important Safety Precautions
It is recommended to use the projector in a dark room to achieve the best effect.
Do not install the projector in places that are heavily air conditioned as water
condensation or high temperature may lead to projector failure.
Ensure adequate ventilation and that vents are not blocked to prevent heat
accumulation inside the projector.
Prevent foreign matters such as nails or paper scraps from falling into the
projector. Do not insert any metals, e.g., iron wire or screwdriver, into the
projector. Turn off the power immediately and turn to professional technician to
remove it if any foreign matters had fallen into the body of the projector.
Do not place any liquid on the projector to avoid risk of electric leakage.
Use soft packaging materials to move the projector, install lens protection cover to
protect the lens from scraping, and keep the projector away from violent vibration.
Areas near the exhaust vent will become hot during the use of the projector, and
touching those areas may result in burns if they are touched by bare hands.
Don't stare into the lens directly so as to protect your eyesight.
Notes:
Don't open the casing of the projector in order to prevent electric shock. Please
turn to qualified professional maintenance personnel for the maintenance as there
are no parts in the machine that users can repair themselves.
Don't expose the projector to rain or moisture so as to prevent misfire or electric
shock.
The product is applicable to be used in temperature range between 0~35°C.
3