Haag-Streit LED Illumination LI 900 Gebrauchsanweisung Seite 19

. Fill illumination
Fill illumination can only be used with an LI 01-plus LED
illumination.
50 Fill illumination FI 01f
51 Fill illumination FI 01p
. Mains connection accessories
52 Mains cable CH 2500 mm
53 Mains cable USA 3100 mm
54 Mains cable USA 760 mm
3 Device installation
3. Power supply unit on HSM-90 instrument table
• Ground wire must not be connected!
55 Connection for main and fixation lamps
56 Mains connection
57 Type plate on housing
3. Head support on instrument table
• Cable must never be clamped in, as
this may lead to the possibility of a short
circuit!
• Any work on cables or device compon-
ents that come into connection with the
power network should only be undertaken
by qualified personnel.
• Connect multi-pole plug-type connector between head
support and instrument table according to the illustration
(58).
• Screw head support tightly into correct position on table
with the two cylinder screws. Mount handgrips and connect
main lamp cable to lamp housing.
• See User guide: 'HSM-90' instrument
table'!
58
1500 7220243.04000
50
52 53
55
57
+5V
Gnd
Gnd
+24V
© Haag-Streit AG, 3098 Koeniz, Switzerland
51
54
56
9
9