Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine's
identification plate.
Your appliance is supplied with a power cord fitted
with a plug designed to be inserted directly into a
standard single-phase socket:
200-230 V/50-60 Hz - 16 A.
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).
• RECOMMENDATIONS FOR USE
After carrying out maintenance on the motor or the
variator, run your machine empty to check that the
drive outlet (planetary gear system) is turning in a
clockwise direction (or that the tool is turning in an
anticlockwise direction, if you are looking down at
the machine from above).
20
1) Tilt the head by
pushing the locking lever
up, then raising the
head.
2) Position the safety
screen first, then the tool
required for the task you
want to perform.
3) Install the bowl. It
does not need to be in
any particular position.
4) You can now lower
the head by pushing the
locking lever up again.
ASSEMBLY
REMOVING THE SAFETY SCREEN:
Place a thumb on each of
the bumps on the inside
of the screen. Simply
press these bumps to re-
lease the screen.
1. PREPARATIONS
PADDLE
For rich shortcrust pastry, crea-
med butter, cheesecake fillings,
cakes, gingerbread and even
mashed potato.
WARNING:
5) For a firm lock of the
tank,
recommended
during kneading, just put
additional pressure on
the lever in direction of
the work surface.
TOOLS
WHISK
For egg whites, Chantilly
cream, sabayon sauce, whip-
ped
cream,
macaroons,
Genoese sponge, meringues,
pancake batter, etc.
Werbung
