ATE 4 Betriebsanleitung Seite 26

26 EN
This will protect the environment and human
health against damage potentially caused
by uncontrolled waste disposal.
Private users: Please contact the local au-
thorities or the dealer you bought the
product from for details about collecting
sites and available eco-friendly recycling
methods.
Commercial users: Please contact your
dealer and read the terms and conditions in-
cluded in your sales contract. Do not dis-
pose of this product together with other
commercial waste.
WEEE Reg. No. DE 30263942
9 Warranty
The statutory warranty regulations of EU
Directive 2019/771 apply. In non-EU coun-
tries, the minimum warranty claims valid in
the specific country apply.
ATE Operating manual
10 Declaration of conformity
Declaration of conformity according to EC -
Machinery Directive 2006/42/EC
The manufacturer hereby declares that the following product
Wheel hub cleaning set 4 03.9314-1370.4 760156
complies with all relevant provisions of Directive 2006/42/EC.
Applied harmonized standards in particular:
EN ISO 12100 Safety of machinery - General
Design principles for risk assessment and risk reduction
DIN EN 1005-1 Safety of machines – Human physical
Performance -Part 1: Terms
DIN EN 1005-2 Safety of machines – Human physical
Performance - Part 2: Manual handling of objects
in connection with machines and machine parts
DIN EN ISO 14120 Safety of machines – separating ends
Protective devices - General requirements
Design and construction of fixed and movable
separating protective devices
DIN EN ISO 4414 Fluid technology - general rules and safety-related
Requirements for pneumatic systems and their components
EN 1127-1 Explosive atmospheres - Explosion protection - Part 1:
Basics and methodology
DIN EN ISO 11148-7 Hand-held non-electrically operated machines -
Safety requirements - Part 7: Grinding machines for abrasive articles
DIN EN ISO 15744 Hand-held non-electrically operated machines -
Noise measurement method – method of accuracy class 2
DIN EN ISO 28927-1 Hand-held motor-driven machines –
Measuring method for determining vibration emissions -
Part 1: Angle grinder and vertical grinder
DIN EN 12464-1 Light and lighting - Lighting of workplaces - Part 1: Indoor
workplaces
DIN EN 12464-2: Light and lighting - Lighting of workplaces - Part 2:
Outdoor workplaces
The technical documentation for the product was in accordance with
Annex VII Part A has been created, upon reasonable request these can be
done
Documents from a national body can be sent by post or email.
Date: March 10, 2023