Deuba monzana LE1200 Anleitung Seite 31

Problem
The unit is not working
The unit is working
with limited power
Water leakage
Excessive noise
exposure
Error codes E1
LO
CL
CH
7.0 TECHNICAL DATA
Model
Dehumidification capacity
Rated voltage
Nominal frequency
Power consumption
Max. power consumption
Water tank capacity
Sound pressure level max.
possible cause
Check whether the
connection is properly established
Is the water level indicator lit up?
Check the room temperature
Check to see if the air filter is dirty
Check whether the ventilation duct
is blocked
Check whether the room door or
window is open
Check that the desired operating
mode is selected and that the
temperature is set correctly.
An overflow may occur when
moving the system.
Check to see if the drain hose is
kinked or bent.
Check whether the system is
installed correctly
Check whether there are any loose,
vibrating parts
The noises sound like running
water
Problem with the humidity sensor.
The ambient humidity is below 20
%.
Protection against
temperatures, the
temperature < 5 °C.
High temperature protection, the
environmental temperature > 38
°C.
Solution
power Insert the power cable correctly into
the wall socket.
Empty the drip tray.
The operating temperature is 5 -35
°C
Clean the air filter if necessary
Remove the obstacle
Keep doors and windows closed
Set the mode and temperature to
the correct setpoint according to
the manual.
Empty the water tank before
transporting
Straighten the hose.
Place the unit on a horizontal and
solid surface
Secure and attach the parts
Noise
refrigerant. It's normal.
Change a sensor
low
ambient The dehumidifier switches itself off
for self-protection
LE1200
6,5 L/D (27 °C, RH 60 %)
12 L/D (30 °C, RH 80 %)
AC 220 – 240 V
50 Hz
172 W (27 °C, RH 60 %)
200 W (30 °C, RH 80 %)
2,0 L
≤ 38 dB (A)
31
is caused by flowing
www.DEUBAXXL.de