Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.9 Connect the RCA cable
Preconditions:
a
The LINE / PHONO switch is in the correct position, see section:
(LINE / PHONO) switch
a
The POWER switch is in the OFF position.
1. Connect one end of the RCA cable to the L LINE OUT R outputs on the
product.
2. Connect the other end of the RCA cable to the device inputs.
Note:
The RCA cable colours should match the colour of the ports they are connected
to.
9.10 Connect the power supply
Preconditions:
a
The POWER switch is in the OFF position.
1. Connect one end of the power cable to the AC IN input on the product.
2. Connect the other end of the power cable to a power outlet.
10 Turntable setup
Important:
Make sure the POWER switch in the OFF position during assembly, connec-
tion, and setup.
10.1 Balance the tonearm
Preconditions:
a
The tonearm is fully assembled, see section:
a
Any vinyl records have been removed from the platter.
a
(For beginners) the stylus guard is attached to prevent needle damage. Ad-
vanced users can remove it for more accurate results.
[} 42].
Assemble the tonearm
Set the
[} 41].
43
Werbung
