Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9 Assembly and connection
Important:
Make sure the POWER switch is in the OFF position during assembly, connec-
tion, and setup.
9.1 Overview of steps
Steps
Description
Step 1
Level the turntable [} 39]
Step 2
Set the platter on the spindle [} 40]
Step 3
Attach the drive belt to the motor pulley [} 40]
Step 4
Place the felt mat over the platter [} 40]
Step 5
Assemble the tonearm [} 41]
Step 6
Attach the dust cover [} 42]
Step 7
Set the (LINE / PHONO) switch [} 42]
Step 8
Connect the RCA cable [} 43]
Step 9
Connect the power supply [} 43]
9.2 Level the turntable
■
(If needed) adjust the feet to level the turntable.
■
Use a leveler (not included) to check that the
product is level.
39
Werbung
