Peaq PMO S241-IFC Bedienungsanleitung Seite 15

Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not
work
Dim image
No Sound
Wrong or abnormal
colors
IM_PMO-S241_S271-IFC_201127_V03_HR.indb 15 IM_PMO-S241_S271-IFC_201127_V03_HR.indb 15
Possible causes
• No signal
• Interrupted power supply
• Brightness and contrast too low
• Headphone/ Speaker not
connected
• Computer audio setting wrong
• Loose or broken pins in the cable
connector
Solution
• Check the power indicator at the back,
if the light is on, check the signal input; if
the light is off, check the power supply
• Adjust the brightness and contrast
• Check the connection of head phone/
speaker
• Check the audio setting of computer
• Check the D-Sub or HDMI or DP cable
to make sure it is in good condition and
securely connected
ENGLISH
15
27/11/2020 11:21 AM 27/11/2020 11:21 AM