Peaq PMO S241-IFC Bedienungsanleitung Seite 11

• Refer all servicing to an authorised service agent.
Do not attempt to repair the product yourself.
Servicing is required when the product has been
damaged in any way, such as the supply cord
or plug are damaged, liquid has been spilled,
objects have fallen into the product, the enclosure
is damaged, the product has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
• Before connecting the product to a socket outlet,
make sure the voltage indicated on the product
corresponds to your local mains.
• If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid hazard.
• Regularly check if the supply cord, product or
extension cable is defective. If found defective, do
not put the product into operation. Immediately
pull the plug.
• Place the supply cord and, if necessary, an
appropriate extension cable in such away that
pulling or tripping over it is impossible. Do not
allow the supply cord to hang down within easy
reach.
• Do not jam, bend or pull the supply cord over
sharp edges.
• The power plug is used as the disconnect
device; the disconnect device shall remain readily
operable. To completely disconnect the power
input, disconnect the mains plug.
• The product may not function properly or not
react to the operation of any control due to
electrostatic discharge. Switch off and disconnect
the product; reconnect after a few seconds.
• Protect the supply cord from being walked on
or pinched particularly at the plug, convenience
receptacles and the point where it exits from the
product.
• Never pull the plug by the supply cord or with
wet hands.
• Disconnect the power plug in case of faults
during use, during lightening storms, before
cleaning and when not using the product for a
longer period of time.
• Danger! Before cleaning, switch the product off
and disconnect the power plug from the socket.
• When the product has reached the end of its
service life, make it defective by disconnecting
the plug from the socket and cutting the cord in
two.
IM_PMO-S241_S271-IFC_201127_V03_HR.indb 11 IM_PMO-S241_S271-IFC_201127_V03_HR.indb 11
Intended use
This product is designed as a monitor only.
For sound playback additional headphones or
speakers, possibly with its own power supply, are
required.
The product is not intended for any commercial
or industrial use. Do not use it for other purposes.
Any other use might lead to damage of the product
or personal injury. The Imtron GmbH assumes no
liability for damage to the product, for property
damage or for personal injury due to careless
or improper usage of the product, or usage of
product which does not meet the manufacturer's
specified purpose.
ENGLISH
11
27/11/2020 11:21 AM 27/11/2020 11:21 AM