Herunterladen Diese Seite drucken

WilTec ATP Serie Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or electric
shock we urge that our clients take some basic safety precautions when using this device. Please read
the operation instructions carefully and make sure you have understood its content.
Always use a grounded power connection with the appropriate mains voltage. You can find the corre-
sponding mains voltage on the type plate. If you have any doubts about the connection being
grounded, have it checked by a qualified professional. Never use a faulty electric cable.
Do not inspect the electrical part of the pressure pond filter in a wet or damp environment or when you
are wet yourself and protect it from direct sunlight. Install this device in a safe location so that nobody
can step on the cable, fall over or damage it. Make sure additionally you provide sufficient cooling
through the ambient air and avoid heat accumulation. Disconnect the power plug before cleaning it
and use only a damp cloth for cleaning.
The electric part of the device contains no parts that can be inspected or serviced by the user. Leave
the maintenance, adjustment and repair to qualified technical personnel. In case of unauthorised inter-
vention the 2-year warranty is no longer valid! Keep these operation instructions safe.
Safety guideline
BEWARE:
The use of this device is allowed on standing bodies of water, garden ponds' water or swimming
ponds and their surrounding areas only with fault current protection-switch with a triggering nominal
current up to 30mA (according to VDE 0100 Article 702 and 738).
The device is not suitable for use in swimming pools, paddling pools and other bodies of water in
which during operation people or animals linger. The operation of the device during the stay of people
and animals in the danger zone is not allowed. Ask your electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or you follow the instructions made by this person how to use
the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Run a visual inspection of the device before every use. Do not use the device if the safety ap-
pliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must not be repaired!
It has to be replaced with a new one. This work can be carried out only by an electrician.
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to cor-
respond to the existent mains voltage.
Never lift, carry or fixate the device by using the power cable.
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
Before working on the pond pump disconnect the appliance by taking the plug out of the
socket.
Avoid exposing the appliance to a direct water jet or rain.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Seite 15

Werbung

loading