Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PARTS & FEATURES
H
F
E
G
A. Wireless charger
B. Charging area
C. USB type-c charging port
D. Ball head holder
E. Ball head screw
F. Air vent holder
G. Sticker holder
H. Magnetic sticker plates (2 pcs)
I.
Magnetic area (holder)
J. USB charging cable
INSTALLING THE DEVICE WITH AIR
VENT HOLDER
•
Place the ball head screw (E) over the ball head of
the air vent holder (F).
•
Place the ball head of the air vent holder (F) with the
ball head screw (E) in the ball head holder (D).
Tighten the ball head screw (E) halfway.
•
•
Attach the air vent holder (F) by pressing the clamp
and placing it in the air vent of your car securely.
•
Choose the preferred angle for the device and
tighten the ball head screw (E) all the way, so the
device is secured in place.
D
B
I
A
C
J
INSTALLING THE DEVICE WITH STICKER HOLDER
•
Place the ball head screw (E) over the ball head of
the sticker holder (G).
•
Press the ball head of sticker holder (G) with the ball
head screw (E) into the ball head holder (D).
•
Make sure the surface on which you want to place
the sticker holder (G) is free from dust and grease.
Wipe the surface with a cloth soaked in degreaser
and then dry thoroughly with a dry cloth.
•
Peel off the foil from double-sided tape of the sticker
holder (G).
•
Place the sticky side of sticker holder (G) on a flat
surface on the dashboard and press 10 seconds to
secure well.
•
Choose the preferred angle for the device and
tighten the ball head screw (E) all the way, so the
device is secured in place.
Note! Do not install the device next to an airbag.
Note! Beware that glue residue of the sticker holder
might affect the surface.
Note! Make sure the device is installed properly. Never
make any adjustments to the device while driving.
POWERING THE DEVICE
•
Carefully plug the USB type-c charging cable (J)
into the USB charging port (C) on the bottom of
the device.
Plug the USB connector of the charging cable (J)
•
into an USB port of your vehicle or car charger.
•
The device automatically powers on, once the
charging cable is connected, and is now ready for use.
•
To power off the device, unplug the charging cable.
WIRELESS CHARGING
The device is an intelligent product and can be used
with any smartphone that is compatible with the Qi
standard. When using the device, the smartphone is
charging without a charging cable or plug, which is
more convenient and efficient and offers you a cable
free experience. The device is compatible with the Qi
wireless charging protocol (V1.2.4) and can be used for
Qi standard receiving equipment (within 15 W).
EN
3
Werbung
