Jinbei HI-5 Anleitung Seite 20

Function Description
Manual mode
For manual mode, set the
the mode button 1 [13] to the
„M" position. First, based on
the current subject distance
(assuming the current dis-
tance is 2 m), turn the control
knob and set the distance in
line with the setting mark.
Automatic mode
Move push the mode button 1 [13]
to position A to activate auto mode
while setting the camera to AUTO or P. The flash output will be the
same as in auto mode. In auto mode the flash output is F2.8 ISO 100
Switch off
To switch off the flash, set the mode button 1 [13] to the „OFF" posi-
tion.
Cell sensor mode 1
In M mode, set the mode button 2 [12] to the S1 position to turn on cell
sensor mode 1, manually set the power control to the output value,
and the JINBEI HI-5 will be triggered by other flashes.
20