Foscam V5EP Benutzerhandbuch Seite 17

Frequently Asked Questions
Q: Does it come with a power supply, and how is it connected to power?
A: No, it does not come with a power supply. To power the camera, you will need to use a
POE (Power Over Ethernet) injector. The power is supplied from the POE injector to the
camera through the ethernet cable.
Q: Does the camera require Wi-Fi?
A: No, it's a POE camera, which means it requires an ethernet cable for both power and data
transmission to your LAN. You will need a switch or router capable of delivering POE.
Q: What are the specifications of Ethernet cables that PoE cameras require?
A: PoE cameras support T-568B connectors and CAT5, CAT6, CAT7 with 8PIN Ethernet cables.
Q: Can this camera be powered with a battery pack in case of power outage or tampering?
A: The camera is powered through the Ethernet cable from your NVR. If you connect your
NVR to a UPS (Uninterruptible Power Supply), the camera will remain powered as long as the
NVR is operational.
17