Aiwa ICD-820DAB Bedienungsanleitung, Installation Seite 10

SETTINGS
General
System Language
English (Default), Spanish, French, German, Polish,
Hungary, Greek, Portuguese, Italian and Dutch. CarPlay
is independent of the system language setting.
Time Zone
Default Setting: (GMT-08:00) Pacific Time (US &
Canada)
Date & Time
24H Mode and Auto Adjust Daylight Saving.
If using a CarPlay, the iPhone will automatically set
date and time. Time Zone needs to be adjusted
manually.
System Tone
With this option a beep will sound every time the
screen is touched.
Power off Delay
Some vehicles during crank to start will interrupt the
accessory power. If the product re-boots during crank
to start, turn ON delay. The delay can select 1, 2, or 3
sec.
Default Setting: OFF
Power OFF Delay ON will also delay when the vehicle is
turned OFF. This might affect hands-free functionality
during a call.
Factory Settings
Touch it to restore settings to default.
Audio
EQ
Touch the EQ icon to access the EQ menu.
The EQ can also be directly accessed while changing
the volume. The volume display will show the EQ icon,
you can touch it to access the Audio Settings.
Preset EQ
Jazz, Hip-hop, Pop, Rock, R&B
Balance/Fader
Touch the balance plus or minus buttons, or swipe to
adjust the left and right balance. Swipe left and right
for quick adjustment.
Touch Fader plus or minus buttons, or swipe to adjust
the front/rear fader. Swipe up and down for quick
adjustment.
Subwoofer
The level and filter can be adjusted for the Sub-pre-
amp output.
Swipe left and right to choose the level, 1-14 db.
Filter: 50 Hz, 80 Hz, 120 Hz, 160 Hz
Touch plus or minus buttons to select a cut-off
frequency for your subwoofer.
Loudness
10
ICD-820DAB
Enhances and gently boosts low and high freq.
Internal Amp
To reduce the possibility of noise entering the signal
chain when utilizing the audio pre-amp outputs, the
internal amp can be turned OFF.
Volume
Settings are for default volumes for Main (Radio,
Media), Hands-free (BT Ring, BT Talking), and Apple
CarPlay / Android Auto (Navi, Voice).
Source Level
The source mode (Radio, USB, BT Audio, AV Input,
Apple CarPlay, and Android Auto) gains control.
Display
Illumination Control
When the vehicle lights are on, the illumination of the
product can be customized for night use.
Gamma
Swiping left and right, Gamma can be adjusted for
both day and night settings.
Screen Brightness
Swipe left and right to adjust.
LED Touch Buttons
Six preset colors can be chosen for Touch Buttons. To
select a preset color, make sure the LED animation
feature is turned off.
LED animation
After turning it on will cycle through all colors on LED
touch buttons.
Default Settings: ON
UI Settings
Wallpaper
Touch to change. Users can change the background
picture by inserting a USB with photos.
Background Brightness
Swipe left and right to adjust it.
Connection
Power On/OFF Bluetooth
Default Setting: ON
Bluetooth will turn OFF automatically when CarPlay
is in use. If other devices are connected via Bluetooth,
they will be disconnected for the duration of CarPlay
use.
Auto Connect
Auto connects to the device when the product is
powered ON.
Default Setting: ON
Auto Answer
Auto answers when there is an incoming call. Default
Setting: OFF