Philips SP9860/13 Bedienungsanleitung Seite 28

28
English
Cleaning the trimmer attachment
Cleaning the beard styler attachment
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.
12 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
Never dry the trimmer with a towel or tissue, as
this may damage the trimming teeth.
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision
trimmer attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment air-dry completely.
Tip: For optimal performance, lubricate the teeth
of the attachment with a drop of sewing machine
oil regularly.
Clean the beard styler attachment after each use.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.