Frothing Milk; Heating Milk; Boil-Dry Protection - Ideen Welt SB-0802A Bedienungsanleitung

FROTHING MILK

1. Connect the power plug to a suitable power outlet.
2. Open the lid and attach the frothing attachment onto the
rotating shaft.
3. Fill in with milk. The milk level must be between the
MAX and MIN marking.
4. Put the lid on firmly by pushing it down slightly.
5. Place the milk frother on the base.
6. To begin heating and frothing, press the on/off button. The
button lights up.
7. When the milk froth is ready, the product turns off
automatically. You can also press the on/off button to turn
off the product
8. Remove the milk frother from the base and open the lid.
9. You can pour or spoon the milk from the milk frother.

HEATING MILK

1. Connect the power plug to a suitable power outlet.
2. Open the lid and remove the frothing attachment from the
rotating shaft.
3. Fill in with milk. The milk level must be between the upper
MAX and lower MIN marking.
4. Put the lid on firmly by pushing it down slightly.
5. Place the milk frother on the base.
6. To begin heating, press the on/off button. The button lights
up.
7. When the hot milk is ready, the product turns off
automatically. You can also press the on/off button to turn
off the product
8. Remove the milk frother from the base and open the lid.
9. You can pour the milk from the milk frother.
Note
If you wish to prepare more hot milk froth, let the milk frother cool down for a few minutes before
further use. As long as the milk frother is hot, the thermostat prevents its being used. You can rinse the
inside of the milk frother with cold water to accelerate cooling.

BOIL-DRY PROTECTION

• If there isn't sufficient milk in the milk frother, it will shut off automatically. Nevertheless, always
ensure that there is enough milk in the product, as switching the device off automatically can
shorten its life span.
• Allow the product to cool down before filling it again.
SB-0802A_A5_150212.indb 16
16
12/2/15 5:22 PM