Daily Use / Functions; How To Increase Freezer Storage Capacity - Bauknecht KGNF 20K A2+ IN Installationsanleitung

DAILY USE
HOW TO INCREASE FREEZER STORAGE
CAPACITY
• Do not block the air outlet area (on the back wall
and on the bottom inside the product) with food
products.
• All shelves and pull-out baskets are removable.
FUNCTIONS
ON/STANDBY
SMART DISPLAY
This function turns On/Stand-by the
refrigerator. To put the product in
Stand-by, press & hold the On/
Stand-by button for 3 seconds.
All the indicators turn off except On/
Stand-by icon back light to indicate
that the appliance is in Stand-by.
This optional function can be used to
save energy. Please follow the
instructions contained in the Daily
Reference Guide to activate/
deactivate the function.
After activation of the Smart Display,
the display goes off , except the Pro
Fresh indicator. If Smart Display is
active – to adjust the temperature or
use other functions, it is necessary to
activate the display by pressing any
button.
After about 15 seconds without
performing any action, the display
goes off again and only the Pro Fresh
indicator remains visible.
When function is deactivated the
normal display is restored. The Smart
• removing the baskets to allow the storage of big
products.
• placing the food products directly on the freezer
shelves.
• removing additional removable accessories.
• The internal temperatures of the appliance may be
aff ected by the ambient temperature, frequency of
door opening, as well as location of the appliance.
Temperature setting should take into consideration
these factors.
• Unless otherwise specifi ed the appliance
accessories are not dishwasher safe.
When the appliance is in Stand-by,
the light inside the refrigerator
compartment does not work.
Remember that this operation does
not disconnect the appliance from
the power supply.
To switch the appliance On again,
simply press and hold for 3 seconds
the On/Stand-By button.
Display is automatically disabled after
a power failure. Remember that this
function does not disconnect the
appliance from the power supply, but
only reduces the power consumed by
external display.
Note: The declared appliance energy
consumption refers to operation with
the Smart Display function activated.
EN
39