How To Use The Appliance; First Time Use - Bauknecht KGNF 20K A2+ IN Installationsanleitung

HOW TO USE
THE APPLIANCE

FIRST TIME USE

HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts
the operation automatically.
After starting the appliance, wait at least 4-6 hours
before placing food into the appliance.
TEMPERATURE SETTING
The appliance is normally factory-set for operation
at the recommended medium temperature.
For details of setting temperature - see the Daily
Reference Guide.
INSTALLATION
INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on
both sides and above the appliance.
The distance between the rear of the appliance and
the wall behind the appliance should be at least
50mm.
A reduction of this space will increase the Energy
consumption of product.
50mm
50mm
38
When the appliance is connected to the power
supply, the display lights up and all the icons appear
on the display for approximately 1 second. The
default (factory) values of the fridge compartment
settings light-up.
Note: Displayed set points correspond to the
average temperature throughout the whole
refrigerator
INSTALLING THE SPACERS
Fit the spacers on the upper and bottom part of
condenser (according the drawing) at the rear of the
appliance.