Märklin 55388 Bedienungsanleitung Seite 19

CV Discription
Multiple station announcements
Bit 0 – 3 = Number of stations
60 PoM Bit 4 = Last station reverses the sequence.
Bit 5 = Locomotive direction determines the sequence.
Bit 6 = Basic setting for sequence.
63 PoM Volume
64 PoM Brake threshold
75 Address 2 (1st consecutive address)
138 PoM Volume for sound "squealing brakes"
139 PoM Volume for sound "operating sounds"
140 PoM Volume for sound 1 (whistle)
141 PoM Volume for sound 2 (Switching whistle)
142 PoM Volume for sound 6 (Bell)
146 PoM Volume for sound 7 (Water pump)
148 PoM Volume for sound 9 (Coal being shoveled)
149 PoM Volume for sound 10 (Rocker grate)
150 PoM Volume for sound 11 (Generator)
151 PoM Volume for sound 12 (Injector)
152 PoM Volume for sound 13 (Blowing out cylinders)
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
Betrieb • Operation • Fonctionnement
6021 Value DCC Value
—
01 – 63 (63)
—
01 – 80 (41)
—
—
—
—
—
—
—
—
—
—
—
19
0 – 127 (1)
0 – 255 (255)
0 – 255 (255)
—
0 – 255 (255)
0 – 255 (200)
0 – 255 (255)
0 – 255 (255)
0 – 255 (200)
0 – 255 (210)
0 – 255 (180)
0 – 255 (180)
0 – 255 (200)
0 – 255 (100)
0 – 255 (255)
Exploitatie • Operación • Operazione