Garmin RAM Anweisungen Seite 5

Installing Your Montana in
the Mount
notice
Before placing the device in the mount,
ensure that the metal contacts on the
device and the mount are dry to avoid
equipment damage. Use the weather cap
to keep the mount cradle dry.
1. Place the weather cap
storage area on the mount.
2. Fit the bottom of your device into the
cradle .
➋

in the
➊
➊
3. Tilt the device back until it snaps into
place.
4. Using the security screw tool, tighten
the security screw
mount.
➌
NOTE: If reflected light or glare makes
the device display difficult to see, apply
an anti-glare screen protector to the
screen.
➋
on the top of the
➌
5