Herunterladen Diese Seite drucken

Russell Hobbs 24671-56 Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been supervised/instructed and understand the
hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H Don't immerse the appliance in liquid.
Don't use accessories or attachments other than those we supply.
Don't use the appliance for any purpose other than those described in these instructions.
Don't use the appliance if it's damaged or malfunctions.
DIAGRAMS
1.
Speed control
2.
Flange
FITTING THE WHISKS/ HOOKS
1.
Switch off (0) and unplug the mixer before fitting or removing the whisks/hooks.
2.
Turn each whisk or hook to align the pips on the shaft with the slots in the drive head, then
push it into the drive head till it clicks into place.
3.
Each whisk/hook must be fitted into a specific drive head.
4.
Insert the one with the flange into the left-hand drive head (looking up from under the
mixer fig. A).
5.
Use both whisks or both hooks, don't mix them.
REMOVING THE WHISKS/HOOKS
1.
Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
2.
Hold both whisks/hooks, to prevent them jumping out, and press e. This will eject them
from the drive heads.
USING THE MIXER
1.
Move the speed control to 0.
2.
Put the plug into the power socket.
Move the speed control to the speed you require (1 to 5).
3.
Pressing the turbo button Y will over-ride the speed set by the speed control, and give
4.
you a burst of high speed. It only works when the motor is already running (1 to 5).
HOUSEHOLD USE ONLY
3.
Whisks
4.
Hooks
3
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE

Werbung

loading