Hamron 025958 Gebrauchsanweisung Seite 20

EN
CONNECT TWO LIGHTS TOGETHER
1. Connect the yellow positive wires (A), the red
positive wires (B) and the black negative wires (C) to
the power supply.
Flash at the same time
2. Connect the green signal wires (D) for the lights
together. The lights now have synchronised flashing.
FIG. 2
Flash alternately
3. Connect the green signal wire for one of the lights
(D) to the "+" pole and then disconnect it.
FIG. 3
4. Now connect the green signal wires for both lights
(D) together.
FIG. 4
5. The lights now flash alternately
20