MikroTik hAP ax lite Kurzanleitung

EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.7 or the latest stable version, to ensure compliance
with local authority regulations!
It is the end user's responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All MikroTik radio devices must be installed according to instructions.
This Quick Guide covers the model: L41G-2axD.
This is a wireless network device. You can find the product model name on the case label
(ID).
Please visit the user manual page on
QR code with your mobile phone.
The most relevant technical specifications for this product can be found on the last page of this Quick
Guide.
Technical specifications, brochures, and more info about products are at
Configuration manual for software in your language with additional information can be found
at https://mt.lv/help
If you need help with configuration, please seek a consultant
First steps:
 Make sure your Internet service provider is allowing hardware change and will issue an automatic IP
address;
 Connect your ISP cable to the first Ethernet port;
 Connect the device to the included power adapter;
 Connect your computer to the wireless network;
 Open https://192.168.88.1
 User name: admin and there is no password by default (or, for some models, check user and wireless
passwords on the
https://mt.lv/um
in your web browser to start the configuration;
sticker);
for the full up-to-date user manual. Or scan the
https://mikrotik.com/products
https://mikrotik.com/consultants