cecotec READYWARM 2000 MAX DUAL BLACK Bedienungsanleitung Seite 35

1. PARTS AND COMPONENTS
Fig. 1
1. Power regulator
2. Temperature knob
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This device is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
Power regulator
Disconnection: position 0.
-
Fan mode: select the first position.
-
Heating at reduced power: turn the selector (right) to the second position.
-
- Full power heating: turn the selector (right) to the third position.
Temperature knob
Turn the temperature knob clockwise to increase temperature, and anticlockwise to decrease
it.
4. Cleaning and maintenance
- Always disconnect the plug from the mains supply before cleaning the appliance.
- Clean the air inlet and outlet grilles frequently.
- Never use abrasive powders or solvents.
READYWARM 2000 MAX DUAL BLACK/WHITE
ENGLISH
35