Hama IT900MBT Kurzanleitung Seite 9

8. Connections
Note
• Connections that use an optical signal cable are less
sensitive to electrical or magnetic interference than
those using a 3.5-mm audio cable.
8.1 Connection via Optical OUT
You can use the digital audio output to connect your
speakers to the tuner, for example, and play its audio
signals through the speakers.
Note
• Switch off the tuner before connecting a terminal
device.
• Remove the protective caps from both ends of the
optical signal cable before connection.
• Do not bend or crush the cable.
• For playback via the optical audio connection, connect an
optical signal cable to the tuner's optical audio output (3)
and to the speaker's optical audio input.
• Press [POWER] (1) to switch on the tuner.
• The tuner's audio signal is now played through the
speakers.
8.2 Connection via LINE OUT
You can use the analogue audio output to connect your
speakers to the tuner, for example, and play its audio
signals through the speakers.
Note
• Switch off the tuner before connecting a terminal
device.
• Do not bend or crush the cable.
• For playback via the analogue audio connection, connect
a 3.5-mm RCA cable to the tuner's analogue audio
output (5) and to the speaker's analogue audio input.
• Press [POWER] (1) to switch on the tuner.
• The tuner's audio signal is now played through the
speakers.
9. Factory settings
To reset the tuner to the factory default settings, proceed as
follows:
• Press and hold the [POWER] button (1) for about 5
seconds.
• All settings you made are deleted.
Note
• Resetting to the factory settings can solve some
problems and malfunctions.
• However, all settings made previously, such as custom
equaliser presets, favourites, and network profiles, are
permanently deleted.
10. Software updates
We are constantly developing new software features
and improvements for our tuners to fix problems, add
functionality, etc.
We recommend that you keep your tuner's software up to
date.
Warning
• Make sure there is a stable power supply before you
start a software update.
• Power supply failure during a software update can
cause irreparable damage to the radio.
11. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• If you do not use the product for a long time, turn off the
device and disconnect it from the power supply. Store it in
a clean, dry place out of direct sunlight.
12. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/ or safety notes.
5