Hama IT900MBT Kurzanleitung Seite 8

7.1 First-time setup of the device with UNDOK
The first time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate WiFi network
that you can connect to with your tablet or smartphone.
This access point is shown in the format 'Setup Hama
PRODUCT NAME MAC address', to enable clear
identification of the product.
Note
The UNDOK app uses the language selected in your
smartphone's system.
7.2 Open/unsecured network
Note
• We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
• If your desired network has no safeguards, it is
enough to select the network from the list and
confirm your selection. The tuner then promptly
connects to the access point.
7.2.1 Procedure for iOS users
• Open the UNDOK app on your iPhone or iPad.
• Tap the 'Set up audio system' menu item.
• Make sure that the tuner is in SETUP mode. If the device
is not in SETUP mode, press and hold the [Power] button
for 5 seconds to switch the device to SETUP mode.
• The UNDOK app now prompts you to connect to the
product's WiFi network. Select the WiFi network (for
example, Setup Hama IT900MBT). Then switch back to
UNDOK and press "Continue". Then return to the UNDOK
app and tap 'Next'.
• Now choose a name for the tuner (for example, Office
IT900MBT) and confirm your entry with 'Next'.
• In the subsequent language selection, you can specify
the system language of the tuner. Click 'Next' to confirm
your selection.
• The various network configuration options are then
offered to you (where applicable, WiFi, WPS and
Ethernet). Tap the desired method; the UNDOK app
switches to the next window.
• Depending on the selected
• method, you can now select and configure the desired
WiFi network, or set up a WPS connection.
• Finally, the tuner connects to the network; by tapping
'Start using my
• audio system', you will be able to use the device in
UNDOK.
4
• The network connection LED indicator (1) is now
constantly lit.
• After successful configuration of the
• tuner, you must connect a playback device (speaker)
using the analogue (5) or digital (3) connection. The
music group is controlled only using UNDOK.
7.2.2 Procedure for Android users
• Open the UNDOK app on your tablet or smartphone.
• Tap the 'Set up audio system' menu item.
• Make sure that the tuner is in SETUP mode. If the device
is not in SETUP mode, press and hold the [Power] button
for 5 seconds to switch the device to SETUP mode.
• The UNDOK app now prompts you to connect to the
product's WiFi network. Select the WiFi network (for
example, Setup Hama IT900MBT). Then return to the
UNDOK app and tap 'Next'.
• Now choose a name for the tuner (for example, Office
IT900MBT) and confirm your entry with 'Next'.
• In the subsequent language selection, you can specify
the language of the tuner. Click 'Next' to confirm your
selection.
• The various network configuration options are then
offered to you (where applicable, WiFi, WPS and
Ethernet). Tap the desired method; the UNDOK app
switches to the next window.
• Depending on the selected method, you can now select
and configure the desired WiFi network, or set up a WPS
connection.
• Finally, the tuner connects to the network; by tapping
"Start using my audio system", you will be able to use the
device in the UNDOK app.
• The network connection LED indicator (1) is now
constantly lit.
• After successful configuration of the tuner, you must
connect a playback device (speaker) using the analogue
(5) or digital (3) connection. The music group is controlled
only using UNDOK.